The Process of Assessment Validation: Steps to Validate Assessments

The Process of Assessment Validation: Steps to Validate Assessments

Blog Article

Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.

Although we've written about validation many times, let’s redefine it. ASQA refers to validation as a quality review of the assessment process.

In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.

As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

We are required by the standards to carry out two types of validation.

The initial assessment validation ensures your RTO's assessments comply with the training package requirements.

The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.

It indicates that validation occurs both before and after the assessment. The focus here is on the first type: assessment tool validation.

Exploring the Two Types of Assessment Validation

Comprehending Assessment Validation

As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.

Post-assessment validation, by contrast, focuses on implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

Our focus here will be on assessment tool validation.

Procedure for Assessment Tool Validation

Having outlined the two types of validation, it’s time to dive into assessment tool validation.

When Assessment Tool Validation Should Be Done

Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.

This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.

You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.

However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:

- resources get updated
- your scope includes new training products
- your course gets reviewed against training product updates
- identify your learning resources as a risk during your risk assessment

ASQA's risk-based approach to regulation necessitates regular risk assessments by RTOs. If there are student complaints about learning resources, it's an opportune time for assessment tool validation.

Identifying Training Products for Validation

It's important to remember this validation ensures that all learning resources are compliant before use. All RTOs need to validate resources for each unit.

Assessment Tool Validation: Required Resources

Training Materials

Given that you are validating your assessment tools, you will need the complete array of your learning resources:

Mapping tool – the first document you should look at. It highlights which assessment items meet unit requirements, accelerating validation.

Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – also verify if instructions for assessors are sufficient and if clear benchmarks for each assessment item are provided. Clear benchmarks are crucial for reliable assessment outcomes.

Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.

Team for Validation

Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.

Overall, your validation panel should have:

Vocational competencies and current industry skills relevant to the unit being validated

Current knowledge and expertise in vocational teaching and learning

Any one of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its equivalent

Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it can serve as proof that you have validated your resources before they are used by students.

While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.

Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

We strongly suggest using a more detailed template to evaluate each unit requirement and its corresponding assessment items. Here is an example:

Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Check?

As outlined in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Assessment Basic Principles
Fairness – Does the assessment ensure equal opportunity and access for everyone?

Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?

Validity – Is the assessment assessing what it is supposed to assess? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Fundamental Rules of Evidence

Validity – Is the evidence demonstrating that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to confirm the learner has the required skills and knowledge?

Authenticity – Is the assessment tool confirming that the work is the candidate’s own?

Currency – Are the assessment tools aligned with current units of competency and contemporary industry practices?

Even though these are regularly addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.

To prevent employing learning resources that miss some unit requirements, be sure to follow these guidelines:

Be Consistent with Your Teachings

Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

diaper changing

bottle preparation, feeding infants from bottles, and cleaning equipment

prepare solid food and feed babies

respond to baby signs and cues appropriately

prepare and settle infants for rest

monitor and encourage age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Notice the Plurals!
Pay more info attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.

Full Compliance or Not Competent

Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further

Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What details can be included in a work package?

Possible answers could include:

Necessary materials

Appropriate costs

Time allocated for activities

Appointed duties and responsibilities

If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.

This is also true for assessment items with double-barrelled questions or questions that require more than one answer at once. Such questions can confuse both students and assessors, as illustrated in the example below:

Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – isolation of work area, engineering controls, personal protective equipment

Work area and ground conditions – eliminating hazards, isolation, use of engineering controls

People – isolating, use of engineering controls, administrative controls

Structural hazards – substituting, isolation, use of engineering controls

Chemical hazards – isolating, use of engineering controls, administrative controls

Equipment or machinery – isolation, engineering controls, administrative controls

Avoiding double-barrelled questions makes it simpler for students to answer and for assessors to accurately judge student competence.

Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.